Lexmark X656DE - Printhead Assembly Removal

4-32 Service Manual
7462
Go Back
Previous
Next
4. Remove the print cartridge ID connector assembly.
5. Disconnect the connection (B) from the print cartridge ID connector assembly.
Printhead assembly removal
WARNING: When replacing the printhead assembly, ensure that the printhead skew is properly adjusted, or
print quality issues will occur. See “Polygon printhead mechanical registration adjustment” on page 4-2.
1. Remove the laser cover. See “Laser cover removal (models X651, X652, X654, and X656)” on
page 4-103 or “Laser cover removal (model X658)” on page 4-101.
2. Remove the six screws (A) securing the metal cover to the machine.
3. Remove the metal cover.
B
A
A