Lexmark X656DE - Paper Types and Weights Supported by the Printer; Paper Types and Weights Supported by the Output Bins

General information 1-5
7462
Go Back
Previous
Next
Paper types and weights supported by the printer
Paper types and weights supported by the output bins
Use this table to determine the possible output destinations of print jobs which use supported paper types and
weights. The paper capacity of each output bin is listed in parentheses. Paper capacity estimations are
calculated based on 75 g/m
2
(20 lb) paper.
Other Envelope 98 x 162 mm
(3.9 x 6.4 in.) to
176 x 250 mm
(6.9 x 9.8 in.)
x
1
This size appears in the Paper Size menu only when the paper source does not support size sensing or
when size sensing is turned off.
2
Only the standard exit bin supports this size.
3
This size setting formats the page for 216 x 356 mm (8.5 x 14 in.) unless the size is specified by the
software application.
4
To support duplexing, the Universal width must be between 148 mm (5.8 in) and 216 mm (8.5 in);
Universal length must be between 182 mm (7.2 in) and 356 mm (14 in).
Paper type
250-or 550-sheet
trays (standard or
optional
Optional 2000-
sheet tray
Multipurpose
feeder
Duplex unit
Paper
•Plain
• Bond
• Colored
•Custom
• Letterhead
•Light
• Heavy
• Preprinted
• Rough/Cotton
• Recycled
xxxx
Card stock xxxx
Envelopes x
Labels
1
• Paper
•Vinyl
xxxx
Transparencies xxxx
1
Printing labels require a special label fuser cleaner which prevents duplexing. The label fuser cleaner is
included with the special cartridge required for label applications.
Paper size Dimensions
250-or 550-sheet
trays (standard
or optional
Optional
2000-sheet
tray
Multipurpose
feeder
Duplex unit