Lexmark X656DE - Sensor (Input); Registration; Supported Paper Sizes, Types, and Weights; Alignment Assembly

Diagnostic aids 3-51
7462
Go Back
Previous
Next
Registration
Sensor (input)
The sensor (input) is located just before the print cartridge and can detect whether media exists in the input
path.
Alignment assembly
The alignment assembly is used to feed the media through the input path and to ensure that media is fed
through the machine in a perfectly straight manner and not in a skewed manner. The alignment assembly can
be adjusted to correct media skew issues and should always be adjusted when it is replaced.
Aligner
assembly
Sensor (input)