Lexmark X656DE - ADF Separator Torque Limiter Assembly Removal; ADF Separator Roll Removal; Adf Cover, Front Removal

Repair information 4-59
7462
Go Back
Previous
Next
5. Slide the ADF separator torque limiter assembly to the front, and remove.
ADF cover, front removal
1. Lift the ADF top door assembly.
2. Remove two screws (A) from the top of the front cover assembly.
3. Remove one screw (B) from the bottom of the ADF cover, front.
4. Release the bottom tabs (C) on the ADF cover, front.
5. Remove the ADF cover.
C
B
A