4-138 Service Manual
7462
Scanner support platform removal (models X651, X652, X654, and X656)
1. Remove the scanner platen glass cover assembly. See “Scanner platen glass cover assembly removal
(models X651, X652, X654 and X656)” on page 4-137.
2. Remove six screws (A) securing the scanner support platform to the scanner flatbed frame.
3. Remove two screws (B) securing the plastic cover to the scanner flatbed frame.
4. Remove the last screw (C) under the plastic cover securing the scanner support platform to the scanner.
5. Remove the torroid from the ribbon cable.
To Next Page
Loading...
