Lexmark X656DE - Page 91

Diagnostic information 2-57
7462
Go Back
Previous
Next
245.67 Pick motor overspeed
failure
Source = Media tray 5
The pick motor does not rotate
at the specified speed.
1. Remove all media present
in media path.
2. Ensure media tray is not
overfilled.
3. Check all connections on
the pick arm assembly.
4. Check all connections on
the system card assembly.
5. Replace the pick arm
assembly if problem
remains. Go to “Pick arm
assembly removal” on
page 4-28.
6. Replace system card
assembly if problem
remains. Go to “System
card assembly removal”
on page 4-47.
245.68 Pick motor stop error
Source = Media tray 5
Pick motor stop error detected
by options tray x
1. Remove all media present
in media path.
2. Ensure media tray is not
overfilled.
3. Check all connections on
the pick arm assembly.
4. Check all connections on
the system card assembly.
5. Replace the pick arm
assembly if problem
remains. Go to “Pick arm
assembly removal” on
page 4-28.
6. Replace system card
assembly if problem
remains. Go to “System
card assembly removal”
on page 4-47.
245.69 Pick motor control
failure.
Source = Media tray 5
The pick motor does not reach
the proper operating speed at
the specified time.
1. Remove all media present
in media path.
2. Ensure media tray is not
overfilled.
3. Check all connections on
the pick arm assembly.
4. Check all connections on
the system card assembly.
5. Replace the pick arm
assembly if problem
remains. Go to “Pick arm
assembly removal” on
page 4-28.
6. Replace system card
assembly if problem
remains. Go to “System
card assembly removal”
on page 4-47.
250.00 MPF area jam
Source = MPF
The media is jammed in the
MPF area.
Go to sensor (input) service
check.
See “Sensor (input) service
check” on page 2-108.
Error
code or
message
Error contents Description/Action Possible repair actions