Lexmark X656DE - Page 94

2-60 Service Manual
7462
Go Back
Previous
Next
260.06 Sensor (envelope
feeder pass through)
late jam
Source = Envelope
feeder
The media is late reaching the
sensor (envelope feeder pass
through) within the specified
time.
1. Remove the envelope
feeder.
2. Remove all media present
in media path.
3. Ensure envelope feeder is
not overfilled.
4. Check, clean or replace the
envelope feeder pick roll for
wear and excess
contamination.
5. Check all connections on
the envelope feeder.
6. Check all connections on
the system card assembly.
7. Replace the envelope
feeder assembly if problem
remains.
8. Replace system card
assembly if problem
remains. Go to “System
card assembly removal”
on page 4-47.
260.07 Sensor (input) late
jam
Source = Envelope
feeder
The media is late reaching the
sensor (input) within the
specified time.
Go to sensor (input) late jam
service check.
See “Sensor (input) late jam
service check.” on
page 2-128.
260.10 Sensor (input) late
jam
Source = Envelope
feeder
The media is late reaching the
sensor (input) within the
specified time.
Go to sensor (input) late jam
service check.
See “Sensor (input) late jam
service check.” on
page 2-128.
260.11 Sensor (input) late
jam
Source = Envelope
feeder
The media is late reaching the
sensor (input) within the
specified time.
Go to sensor (input) late jam
service check.
See “Sensor (input) late jam
service check.” on
page 2-128.
260.12 Sensor (input) late
jam
Source = Envelope
feeder
The media is late reaching the
sensor (input) within the
specified time.
Go to sensor (input) late jam
service check.
See “Sensor (input) late jam
service check.” on
page 2-128.
260.13 sensor (envelope
feeder pass through)
static jam
Media remains on the sensor
(envelope feeder pass through)
during the warm up sequence.
1. Remove the envelope
feeder.
2. Remove all media present
in media path.
3. Replace the envelope
feeder is problem remains.
260.14 Sensor (input) late
jam
Source = Envelope
feeder
The media is late reaching the
sensor (input) within the
specified time.
Go to sensor (input) late jam
service check.
See “Sensor (input) late jam
service check.” on
page 2-128.
Error
code or
message
Error contents Description/Action Possible repair actions