Lexmark X850E - Page 108

108
Attendance messages
287 Paper jam, check
[area name].
There is a single jam in the specified
area indicated by area name. area
name can be areas F or G.
1 Clear the jam from areas F or G.
2 Touch Continue. If all print media is cleared
from the path, the job resumes printing.
287 Paper jam, [x] pages
jammed.
There are multiple jams in areas F or
G. x indicates the number of jammed
sheets of print media.
1 Clear the jams from areas F or G.
2 Touch Continue. If all print media is cleared
from the path, the job resumes printing.
288 Paper jam, check
[area name].
There is a single jam in the specified
area indicated by area name. area
name can be areas F or G.
1 Clear the jam from areas F or G.
2 Touch Continue. If all print media is cleared
from the path, the job resumes printing.
288 Paper jam, [x] pages
jammed.
There are multiple jams in areas F or
G. x indicates the number of jammed
sheets of print media.
1 Clear the jams from areas F or G.
2 Touch Continue. If all print media is cleared
from the path, the job resumes printing.
289.yy Staple error,
check area G. Remove
paper from bin.
There is a single staple jam in area G. 1 Clear the staple jam.
2 Remove the print media from the bin.
3 Touch Continue. If all print media is cleared
from the path, the job resumes printing.
290.00 Scanner jam,
remove all originals
from the scanner
The scanner detects an original
document at the automatic document
feeder (ADF) feed sensor while it is
idle. This is a type of jam.
Remove all original documents from the ADF to
clear the jam. The message clears.
290.01 Scanner jam,
remove all originals
from the scanner
The scanner detects a jam. Remove all original documents from the
scanner to clear the jam. The message clears.
290.02 Scanner jam,
remove all originals
from the scanner
The scanner detects a jam. Remove all original documents from the
scanner to clear the jam. The message clears.
290.03 Scanner jam,
remove all originals
from the scanner
The scanner detects a jam. Remove all original documents from the
scanner to clear the jam. The message clears.
290.10 Scanner jam,
remove all originals
from the scanner
The scanner detects an original
document jam at the ADF pre-
registration sensor while the scanner
is idle.
Remove all original documents from the
scanner to clear the jam. The message clears.
290.11 Scanner jam,
remove all originals
from the scanner
The scanner detects a jam. Remove all original documents from the
scanner to clear the jam. The message clears.
290.12 Scanner jam,
remove all originals
from the scanner
The scanner detects a jam. Remove all original documents from the
scanner to clear the jam. The message clears.
290.13 Scanner jam,
remove all originals
from the scanner
The scanner detects a jam. Remove all original documents from the
scanner to clear the jam. The message clears.
290.14 Scanner jam,
remove all originals
from the scanner
The scanner detects a jam while
inverting the original document.
Remove all original documents from the
scanner to clear the jam. The message clears.
290.15 Scanner jam,
remove all originals
from the scanner
The scanner detects a jam while
inverting the original document.
Remove all original documents from the
scanner to clear the jam. The message clears.
290.20 Scanner jam,
remove all originals
from the scanner
The scanner detects a jam at all ADF
size sensors while the scanner is idle.
Remove all original documents from the
scanner to clear the jam. The message clears.
Message Meaning Action