110
Functions disabled transitional messages
Functions disabled transitional messages
294.02 Scanner jam,
remove all originals
from the scanner
The scanner detects a jam in the ADF
when the pre-registration sensor is off
while inverting the original document.
Remove all original documents from the
scanner to clear the jam. The message clears.
295.00 Scanner jam,
remove all originals
from the scanner
The scanner detects a jam due to a
mismatched size during a mixed size
scan job.
Remove all original documents from the
scanner to clear the jam. The message clears.
295.01 Scanner jam,
remove all originals
from the scanner
The scanner detects a jam due to a
mismatched size during a same size
scan job.
Remove all original documents from the
scanner to clear the jam. The message clears.
295.02 Scanner jam,
remove all originals
from the scanner
The scanner detects a jam due to a
prohibited mixed size scan job.
Remove all original documents from the
scanner to clear the jam. The message clears.
295.03 Scanner jam,
remove all originals
from the scanner
The scanner determines that the
length of the original document is too
short to scan.
Remove all original documents from the
scanner to clear the jam. The message clears.
Note: Use the flatbed to scan the job.
295.04 Scanner jam,
remove all originals
from the scanner
The scanner determines that the
length of the original document is too
long to scan.
Remove all original documents from the
scanner to clear the jam. The message clears.
Note: Use the flatbed to scan the job.
Occurrence Message Information
A function is disabled. A user
enters a shortcut for the function.
<Function name> turned off by
system administrator
The message appears for 3 seconds, and
then the previous screen appears.
The USB on the front of the control
panel is turned off. A user inserts a
USB cable in the slot.
USB turned off by system
administrator.
The message appears for 3 seconds, and
then the previous screen appears.
Message Meaning Action
To Next Page
Loading...
