Lexmark X850E - Fax Settings

51
Settings
Fax Settings
Use these menu items to set the MFP for settings related to faxing.
Analog Fax Setup
With analog fax, the fax method is by a telephone line. Use the following menu items to set up analog fax.
Contrast Specifies the contrast used for
the copy job. The default is
dependent on the Content
menu item. If the Content
menu item is reset from the
default setting, then the default
for Contrast is reset, also.
0–5 Text default is 5.
The default is 0 for items other than text.
Shadow Detail Adjusts the amount of shadow
detail visible on a copy.
-4 to +4 (0*) -4 preserves the least amount of shadow detail.
+4 preserves the most shadow detail.
Scan edge to
edge
Specifies if the original
document is scanned edge-to-
edge prior to making copies.
Off*
On
Menu item Purpose Values and descriptions
Fax Mode Sets which fax
method or mode is
used.
Analog Fax Server If the MFP does not have a modem, this menu item
does not appear.
Analog Fax
Setup
Specifies the link
to analog fax
setup. With analog
fax, the fax method
is by a telephone
line.
link If the MFP does not have a modem, Fax Setup link
does not appear.
Fax Server
Setup
Specifies the link
for fax server
setup. The fax job
is sent to a fax
server for
transmission.
link
Menu item Purpose Values and descriptions