Lexmark X850E - Page 70

70
Settings
Multipage Order Determines the positioning of
multiple page images when using
Multipage Print. See Multipage
Print on page 69.
The positioning depends on the
number of images and whether the
images are portrait or landscape in
orientation.
Horizontal*
Vertical
Reverse Horizontal
Reverse Vertical
For example, if selecting 4-Up multiple page printing and portrait orientation, the results differ
depending on the Multipage Order value selected.
Multipage View Determines the orientation of a
multiple-page sheet.
Auto* Lets the MFP choose between portrait
and landscape orientation.
Long Edge Sets the long edge of the print media
as the top of the page (landscape).
See Duplex Bind on page 68 for
more information.
Short Edge Sets the short edge of the print media
as the top of the page (portrait). See
Duplex Bind on page 68 for more
information.
Multipage Border Prints a border around each page
image when using Multipage Print.
None* Does not print a border around each
page image.
Solid Prints a solid line border around each
page image.
Staple Job Sets stapling as the default for all
print jobs.
Note: This menu item appears
when an optional finisher is
installed.
Off* Does not staple print jobs.
Auto
Front
Back
Dual
Staples each print job sent to the
printer.
Staples each print job based on
information sent from the printer driver
or application software.
Hole Punch Punches holes along the edge of
the paper.
Note: This menu item appears
when an optional finisher is
installed.
On Hole punches each print job sent to
the printer.
Off* Does not hole punch print jobs.
Hole Punch
Mode
Punches holes along the edge of
the paper.
Note: This menu item appears
when an optional finisher is
installed.
2
3*
Only appears when the 3 -hole finisher
is installed.
2
4*
Only appears when the 4-hole finisher
is installed.
Menu item Purpose Values and descriptions
Horizontal
Order
Vertical
Order
Reverse
Vertical Order
Reverse
Horizontal Order
21
43
31
42
12
34
13
24