Lexmark X850E - Page 99

99
Attendance messages
Load manual feeder with
[type] [size]
Occurs when the MFP receives a
manual feed request for a specific
size and type of print media when
none is loaded into the multipurpose
feeder.
Touch Continue if print media is in the
multipurpose feeder. The job continues.
Touch Continue if there is no print media in the
multipurpose feeder. All requests for additional
pages are automatically overridden, and print
media is selected from an automatic source.
Touch Automatically select media to override
manual requests for Manual Paper and
Manual Env for the rest of the print job. All
requests for additional pages are automatically
overridden and print media is selected from an
automatic source.
Touch Cancel Job to cancel the current job if
needed.
Touch Reset Active Bin to change to another
linked bin.
Load [src] with [Custom
String]
Occurs when a source is loaded with
an incorrect print media size and type
as specified in the Paper Menu.
Touch Continue. Load the specified source that
is set for the requested size and type.
Touch Cancel Job to cancel the current job if
needed.
Touch Reset Active Bin to change to another
linked bin.
Load [src] with [Custom
Type Name]
Occurs when a source is loaded with
an incorrect print media size and type
as specified in the Paper Menu.
Touch Continue. Load the specified source that
is set for the requested size and type.
Touch Cancel Job to cancel the current job if
needed.
Touch Reset Active Bin to change to another
linked bin.
Load [src] with [size] Occurs when a source is loaded with
an incorrect print media size as
specified in the Paper Menu.
Touch Continue. Load the specified source that
is set for the requested size.
Touch Automatically select media to override
manual requests for Manual Paper and Manual
Env for the rest of the print job. All requests for
additional pages are automatically overridden,
and print media is selected from an automatic
source.
Touch Cancel Job to cancel the current job if
needed.
Touch Reset Active Bin to change to another
linked bin.
Load [src] with [type]
[size]
Occurs when the MFP requests that a
specific media source be loaded with
a specific type and size as specified
in the Paper Menu, but the current
source contains an incorrect media
size and type.
Touch Continue. Load the specified source that
is set for the requested size and type.
Touch Cancel Job to cancel the current job if
needed.
Touch Reset Active Bin to change to another
linked bin.
Load Staples The staple cartridge in the finisher is
empty.
Touch Continue. The message is cleared. The
staple function ceases to work until a new staple
cartridge is installed.
Install a new staple cartridge to clear the
message and continue printing the staple job.
Touch Cancel Job to cancel the current job if
needed.
Message Meaning Action