Clearing staple jams
124
Clearing jams
4 Use the metal tab to lift the staple guard, and then pull out the sheet of staples.
Discard the entire sheet.
5 Remove any loose staples from the staple guard.
6 Look through the clear covering on the bottom of the cartridge holder to make sure no staples are jammed in the
entry throat.
7 Press down on the staple guard until it snaps securely into place.
8 Push the cartridge holder firmly into the stapler until the holder clicks into place.
9 Close Door G.
Priming Stapler appears on the operator panel display. Priming ensures the stapler is functioning properly.
To Next Page
Loading...
