Installing an option card
94
Installing options
Installing an option card
Warning: Option cards are easily damaged by static electricity. Touch something metal such as the MFP frame
before you touch a memory card.
Note: You need a small Phillips screwdriver to attach the option card to the system board.
1 Remove the system board access panel. (See Accessing the MFP system board.)
2 Unpack the card. Save the packaging materials.
3 Align the connection points on the card with the connector on the system board, and push the card firmly into the
system board connector.
4 Insert the screws saved from the cover plate (or the extra screws shipped with the card).
5 Tighten the screws to secure the card.
To Next Page
Loading...
