Lexmark X850E - Changing the Fax Resolution; Adjusting the Darkness Setting; Sending a Fax at a Later Time

Changing the fax resolution
43
Faxing
Changing the fax resolution
1 Place your original document in the ADF face up. Labels on the ADF show how to load the paper based on its size.
2 Adjust the paper guides.
3 Touch Fax on the home screen.
4 Enter the fax number.
5 Touch Options.
6 Touch the button that represents the resolution you want.
7 Touch Fax It.
Adjusting the Darkness setting
1 Place your original document in the ADF face up. Labels on the ADF show how to load the paper based on its size.
2 Adjust the paper guides.
3 Touch Fax on the home screen.
4 Enter the fax number.
5 Touch Options.
6 Touch the left Darkness arrow to reduce the darkness of the fax or touch the right Darkness arrow to increase the
darkness of the fax.
7 Touch Fax It.
Sending a fax at a later time
1 Place your original document in the ADF face up. Labels on the ADF show how to load the paper based on its size.
2 Adjust the paper guides.
3 Touch Fax on the home screen.
4 Enter the fax number.
5 Touch Options.
6 Touch Advanced Options.
7 Touch Delayed Send.
Note: If Fax Mode is set to Fax Server, the Delayed Send button will not appear. Faxes waiting for
transmission are listed in the Fax Queue.
8 Touch the left arrow to reduce the time or the right arrow to increase the time the fax will be transmitted.
Note: Touching the increase or decrease arrow increments the time by 30 minutes. If the current time is
shown, the left arrow is grayed out.
9 Touch Done.