Lexmark X850E - Page 68

Loading the multipurpose feeder
68
Printing
5 Load the media in the feeder.
Note: Make sure the print media is below the max fill line. Overloading may cause jams.
6 Slide the width guides until they lightly rest against the edge of the media.
7 Set the Paper Size and Paper Type for the multipurpose feeder (MP Feeder Size and MP Feeder Type) to the
correct value for the print media you loaded.
a Touch the Menus button on the touch screen.
b Press the to the right of Paper Menu.
c Press the to the right of Paper Size or Paper Type.
d Press the to the right of the paper source you are using.
e Press <-- or --> until you see the paper size or paper type you loaded, and then press Submit.
f Press the home icon to return to the home screen.