2
Using the handle, pull the multipurpose feeder extender.
Note: Guide the extender gently so that the multipurpose
feeder is fully extended and open.
3
Slide the width guide to the correct position for the size of the
paper being loaded.
Note: Use the paper size indicators on the bottom of tray to
help position the guides.
4
Prepare the paper or specialty media for loading.
•
Flex the sheets back and forth to loosen them, and then
fan them. Do not fold or crease the paper. Straighten the
edges on a level surface.
•
Hold transparencies by the edges, and then fan
them. Straighten the edges on a level surface.
Note: Avoid touching the printable side of the
transparencies. Be careful not to scratch them.
13
To Next Page
Loading...
