Operation Procedure
To restore the previous control
If the preset speed has been cancelled, when you press the lever upward in the ”RES/ACC” direction while “RADAR READY” shows
up on the multi–information display and at a vehicle speed of about more than 40 km/h (25 mph), the speed set prior to cancellation
will be restored.
Changing vehicle–to–vehicle distance setting
You can select one of the following vehicle–to–vehicle distances: “Long”, “Middle” or “Short”. Each time you push the “DISP2” switch
briefly, the setting changes from “Long” to “Middle” to “Short” and then back to “Long”. You can confirm the setting on the multi–informa-
tion display.
“Long” “Middle” “Short”
3 arcs
2 arcs 1 arc
See Owner’s Manual for Complete Information.
”DISP2” Switch
− 8 −
To Next Page
Loading...
