Each mode display
The control system in the vehicle–to–vehicle
distance control mode differs from the one in the con-
ventional (fixed speed) cruise control mode.
When using dynamic laser cruise control, make sure
which mode is selected.
In addition to the vehicle–to–vehicle distance control mode described in this quick reference guide, dynamic laser cruise con-
trol has conventional (fixed speed) cruise control mode for cruising at fixed speeds. For the conventional (fixed speed) cruise
control mode, see Section 3–1 in the “Owner’s Manual”.
Changing to the conventional (fixed speed) control mode
Push the main switch to turn on the system. The “CRUISE” indicator light
in the instrument cluster comes on and “RADAR READY” appears on the
multi–information display.
Multi–information display:
Push the control lever in the “MODE” direction for longer
than 1 second to change to the fixed speed control mode.
Vehicle–to–Vehicle Distance
Control Mode
In Ready StateIn Control
<Example>
Fixed Speed Control Mode
No display
<Example>
− 9 −
2003 LS430 Laser Cruise (OM50602U) from Aug. ’02 Prod.
To Next Page
Loading...
