324
4-6. Using the other driving support systems
vehicle, the length of the rear of the
vehicle can be adjusted to help avoid
colliding with objects to the rear of the
vehicle.
■ Clear registered parking space
The parking spaces registered to the
memory function can be deleted. Park-
ing space information cannot be
deleted when assistance is being per-
formed or when registering parking
space information to the memory func-
tion.
The operating state, assistance opera-
tion, etc. of the Advanced Park is dis-
played on the Center Display. If a
message is displayed, respond accord-
ing to the content displayed.
■ If “No available parking space” is dis-
played
Move the vehicle to a location where a
parking space or parking lines can be
detected.
■ If “Unavailable in current condition” is
displayed
Move the vehicle to another location and
use the system.
■ If “Not enough space to exit” is dis-
played
The parallel parking exit function cannot be
used due to a situation such as the distance
between your vehicle and vehicles parked
in front of and behind your vehicle being
short, the existence of an object in the exit
direction, etc.
Check the conditions of the area around
your vehicle and exit from the parking
space manually.
■ If “Cannot control speed” is displayed
The system judged that it cannot adjust the
speed of the vehicle when using the system
in an area with a slope or step and assis-
tance was canceled.
Use the system in a level location.
■ If “Obstacle detected” is displayed
As a moving object or stationary object that
may collide with your vehicle has been
detected, the engine output control/brak-
ing control operates to suspend Advanced
Park assistance.
Check the condition of the surrounding
area. To resume assistance, select the
“Start” button on the Center Display.
■ If “No available parking space to regis-
ter” is displayed
This message is displayed when is
selected at a parking space that cannot be
detected.
Operate the system at a parking space
where differences in the road surface can
be recognized. (P.317)
NOTICE
● Take care when using the park position
adjustment (forward) or park position
adjustment (reverse) for adjusting
because the vehicle may collide with
parking blocks, curb stones, or other
low objects.
● If it is likely that your vehicle will collide
with a nearby vehicle/object, parking
block, curb stone, etc., depress the
brake pedal to stop the vehicle and
press the Advanced Park main switch
to disable the system.
Advanced Park displayed mes-
sages
To Next Page
Loading...
