Lexus LS500 2024 - Page 80

80
2-1. Instrument cluster
Speed limit/RSA (Road Sign
Assist) display area (if equipped)
Displays the following items:
• Speed limit of the current road (linked to
the navigation system) (U.S.A. only)
• RSA (Road Sign Assist) display
(P.241)
 Minimal
These images are examples only, and may
vary slightly from actual conditions.
Speedometer
■ Head-up display
The head-up display may seem dark or hard
to see when viewed through sunglasses,
especially polarized sunglasses. Adjust the
brightness of the head-up display or
remove your sunglasses.
■ Eco Driving Indicator or tachometer is
displayed when
When the following conditions are met, the
tachometer
*1
or eco driving indicator
*2
will
be displayed on the head-up display.
● Full mode (P.79) is selected as
head-up display type.
● LTA (Lane Tracing Assist) is disabled.
(P.221)
● LDA (Lane Departure Alert) is disabled.
(P.229)
● The cruise control, selected by pressing
the driving assist mode select switch, is
canceled. (P.252, 253)
● F SPORT models: The meter display type
setting is set to display type 2 or a shift
position other than M is selected when
the meter display type setting is set to dis-
play type 1 or 3
*1
: A driving mode other than eco drive
mode is selected.
*2
: The driving mode is set to eco drive
mode.
D
A
WARNING
■ Before using the head-up display
● Check that the position and brightness
of the head-up display image does not
interfere with safe driving. Incorrect
adjustment of the image’s position or
brightness may obstruct the driver’s
view and lead to an accident, resulting
in death or serious injury.
● Do not continuously look at the
head-up display while driving as you
may fail to see pedestrians, objects on
the road, etc. ahead of the vehicle.
NOTICE
■ To prevent damage to components
● Do not place any drinks near the
head-up display projector. If the pro-
jector gets wet, electrical malfunctions
may result.
● Do not place anything on or put stick-
ers onto the head-up display projector.
Doing so could interrupt head-up dis-
play indications.
● Do not touch the inside of the head-up
display projector or thrust sharp edges
or the like into the projector. Doing so
could cause mechanical malfunctions.