141
3-3. Adjusting the seats
3
Operation of each component
NX200t_OM_USA_OM78145U
■ Returning the rear seatbacks (power seat)
Press and hold the switch to return the seatback.
The buzzer sounds and operations start. The buzzer sounds again when the oper-
ation is complete.
To stop the operation of a seat partway, press either seat operation switch for that
seat, once more. Switches for that seat in other locations can be used to stop the
operations. (buzzer sounds depending on stopping position of the seatback)
Check that the plate for the seat
belt is on the front side of the seat.
When using the seat belt for the rear
center seat (→P. 31)
Instrument panel switch Rear seat switch
Luggage room switch
To Next Page
Loading...
