142
3-3. Adjusting the seats
NX200t_OM_USA_OM78145U
■ Operating conditions for reclining adjustment (power seat)
When the following conditions are met, switch operations are possible.
■ Operating conditions for folding down the seatback (power seat)
When the following conditions are met, switch operations are possible.
● When operating the luggage compartment switch: When the back door is open.
● When the operating switches for the seat to be operate are not being pressed.
When the engine switch is in IGNITION ON mode, in addition to the above, the power
seat operates for any of the following conditions:
• Parking brake is engaged
• The brake pedal is depressed
• The shift lever is in P
■ Operating conditions for returning the seatback (power seat)
When the following conditions are met, switch operations are possible.
● When the operating switches for the seat to be operate are not being pressed.
When the engine switch is in IGNITION ON mode, in addition to the above, the power
seat operates for any of the following conditions:
• Parking brake is engaged
• The brake pedal is depressed
• The shift lever is in P
● When the seatback position is within the range
of illustration A.
● When the operating switches for the seat to be
operate are not being pressed.
● When operating the rear seat switch: The
seatback position is within the range of illustra-
tion A.
● When operating the instrument panel switch
or luggage compartment switch: The seatback
position is within the range of illustration B.
● When operating the rear seat switch: When
the rear door for the seat to be operated is
open.
● When operating the rear seat switch: When
the seatback position is within the range of
illustration A.
● When operating the rear seat switch: When
the rear door for the seat to be operated is
open.
● When operating the luggage compartment
switch: When the back door is open.
To Next Page
Loading...
Need help?
General
