Selecting an appropriate child restraint system
Precautions for selecting a child restraint system
To ensure safety, observe the following when using a child restraint system.
● Make sure to observe the precautions regarding child restraint systems.
● Choose a child restraint system appropriate to the age and size of the child.
● Check the compatibility of the child restraint system with each seating position.
Depending on the child restraint system, it may not be able to be installed.
●
For details about use of a child restraint system, check the user’s manual of the
child restraint system.
WARNING
● Check that the seat belt for the seat next to a child restraint system can be worn
properly. Depending on the type of child restraint system, the seat belt may not be able
to be worn properly. In this case, use another seat.
● When adjusting the driver’s seat, if it contacts a child or child restraint system, install
the child restraint system to the rear seat behind the front passenger’s seat.
● Adjust the front passenger seat so that it does not interfere with the child or child
restraint system.
● When installing a child restraint system with support base, if the child restraint system
contacts a seatback when installing it to the support base, adjust the seatback rear-
ward until they do not contact.
● If the seat belt shoulder anchor is in front of the
seat belt guide of a child restraint system, move
the seat forward.
● When installing a junior seat, if the child in your child restraint system is in a very
upright position, adjust the seatback angle to the most comfortable position.
Selecting a child restraint system
Use a child restraint system that conforms to UN (ECE) R44 or UN (ECE) R129.
UN (ECE) R44 and UN (ECE) R129 are U.N. regulations for child restraint
systems.
1-4. Preparations for safe driving with children in the vehicle
106
To Next Page
Loading...
