Changing settings for the head-up display
WARNING
● Check that the position and brightness of the head-up display image does not inter-
fere with safe driving.
Incorrect adjustment of the image’s position or brightness may obstruct the driver’s
view and lead to an accident, resulting in death or serious injury.
● As the hybrid system needs to be operating while changing the settings of the head-up
display, ensure that the vehicle is parked in a place with adequate ventilation. In a
closed area such as a garage, exhaust gases including harmful carbon monoxide
(CO) may collect and enter the vehicle. This may lead to death or a serious health
hazard.
NOTICE
To prevent 12-volt battery discharge, ensure that the hybrid system is operating while the
changing the settings of the head-up display.
INFORMATION
■ Changing settings with the steering wheel switches
If any of the following items have been set as as a favorite steering wheel switch function,
settings of the head-up display can be changed using the steering wheel switches.
● : Display on/off
●
: Display mode
●
/ : Height
●
/ : Brightness
■ Enabling/disabling of the head-up display
If the head-up display is disabled, it will remain disabled when the power switch is turned
off then back to ON.
■ Display brightness
In addition to the brightness setting, the brightness of the display will change automatical-
ly according to the ambient brightness.
5-3. Changing the settings of the displays
371
5
Vehicle status information and indicators
To Next Page
Loading...
