Buzzer and screen notifications when approaching an object at low
speed
*
Purpose of the Lexus parking assist-sensor
The distance from your vehicle to nearby obstacles when parallel parking or
maneuvering into a garage is measured by the sensors and communicated via the
displays and a buzzer. Always check the surrounding area when using this system.
WARNING
■ Cautions regarding the use of the system
There is a limit to the degree of recognition accuracy and control performance that this
system can provide, do not overly rely on this system. The driver is always responsible for
paying attention to the vehicle’ surroundings and driving safely.
■ To ensure the system can operate properly
Observe the following precautions. Failing to do so may result in the vehicle being unable
to be driven safely and possibly cause an accident.
● Do not damage the sensors, and always keep them clean.
● Do not attach a sticker or install an electronic component, such as a backlit license
plate (especially fluorescent type), fog lights, fender pole or wireless antenna near a
radar sensor.
● Do not subject the surrounding area of the sensor to a strong impact. If subjected
to an impact, have the vehicle inspected by any authorized Lexus retailer or Lexus
authorized repairer, or any reliable repairer. If the front or rear bumper needs to
be emoved/installed or replaced, contact any authorized Lexus retailer or Lexus
authorized repairer, or any reliable repairer.
● Do not modify, disassemble or paint the sensors.
● Do not attach a license plate cover.
● Keep your tires properly inflated.
■
When to disable the function
In the following situations, disable the function as it may operate even though there is no
possibility of a collision.
● Failing to observe the warnings above.
● A non-genuine Lexus suspension (lowered suspension, etc.) is installed.
* :
If equipped
6-2. Using the safe driving support functions
439
6
Driving support system
To Next Page
Loading...
