Operation of the intrusion sensor and tilt sensor will be canceled, and a message will
be displayed on the multi-information display in the instrument cluster.
Touch the switch again to set the intrusion / tilt sensor again.
A message will be shown on the multi-information display in the instrument cluster.
INFORMATION
■ Automatic re-enabling of the intrusion sensor and tilt sensor
● After the intrusion sensor and tilt sensor are canceled, unlocking the doors using
the entry function or wireless remote control will re-enable the intrusion sensor
and tilt sensor.
● The intrusion sensor and tilt sensor will automatically be re-enabled when the
alarm system is reactivated.
1-5. Entering/exiting the vehicle and loading luggage
146
To Next Page
Loading...
