Press to change the setting of the item you
want to adjust.
D
Menu button
Press to display the icon display area and
select the item you want to adjust.
E
Lever
Operate to change between digital mirror
mode and optical mirror mode.
Related Links
Adjusting the Digital Rear-view Mirror(P. 187)
Changing modes of the Digital Rear-view Mirror
Operate the lever to change between digital mirror mode and optical mirror
mode.
1 Digital mirror mode
Displays an image of the area behind the
vehicle.
[
] will illuminate in this mode.
2 Optical mirror mode
Turns off the display of the Digital Rearview
Mirror allows it to be used as an optical
mirror.
Digital mirror mode operating condition
The power switch is turned to ON.
When the power switch is changed from ON to OFF or ACC, the image will
disappear after several seconds.
Precautions about digital mirror mode
If it is difficult to see the displayed image due to light reflected off the Digital
Rear-view Mirror, the camera being dirty or covered with water droplets, dust, etc.,
or if lights of a vehicle behind your vehicle or the displayed image are bothering
you, change to optical mirror mode.
When it is raining, if the image is unclear due to water on the rear window, operate
the rear wiper.
1-6. Obtaining the correct driving posture
186
To Next Page
Loading...
