1 To select a mirror to adjust, press the switch.
A
Select the left mirror
B
Select the right mirror
2 To adjust the mirror, press the switch.
A
Adjust the mirror surface up
B
Adjust the mirror surface right
C
Adjust the mirror surface down
D
Adjust the mirror surface left
INFORMATION
■ Mirror angle can be adjusted when
The power switch is in ACC or ON.
■ Automatic adjustment of the mirror angle (vehicles with driving position mem-
ory)
A desired mirror face angle can be entered to memory and recalled automatically by
the driving position memory.
■ Linked mirror function when reversing (vehicles with driving position memory)
When the mirror select switch is in the “L” or “R” position, the outside rear view
mirrors will automatically angle downwards when the vehicle is reversing in order to
give a better view of the ground.
To disable this function, move the mirror select switch to the neutral position (be-
tween “L” and “R”)
With the shift position in R, adjust the mirror angle at a desired position to set the
mirror angle used when the vehicle is reversing.
The adjusted angle will be memorized and the mirror will automatically tilt to the
memorized angle whenever the shift position is shifted to R from next time.
The memorized downward tilt position of the mirror is linked to the normal position
(angle adjusted with the shift position in other than R). Therefore, if the normal
position is changed after adjustment, the tilt position will also change.
1-6. Obtaining the correct driving posture
194
To Next Page
Loading...
