WARNING
■ For the shift lever
● Do not remove the shift lever knob or use anything but a genuine Lexus shift lever
knob. Also, do not hang anything on the shift lever. Doing so could prevent the shift
lever from returning to position, causing unexpected accidents to occur when the
vehicle is in motion.
● In order to prevent the shift position from accidentally being changed, do not touch the
shift lever when not using them.
■ P position switch
● Do not press the P position switch while the vehicle is moving.
If the P position switch is pressed when driving at very low speeds (for example,
directly before stopping the vehicle), the vehicle may stop suddenly when the shift
position switches to P, which could lead to an accident.
● In order to prevent the shift position from accidentally being changed, do not touch the
P position switch when not using them.
NOTICE
■ Notes regarding shift lever and P position switch operation
Avoid repeatedly operating the shift lever and P position switch in quick succession. The
system protection function may activate and it will not be temporarily possible to shift the
shift position other than P. If this happens, please wait for a while before attempting to
change the shift position again.
■ When exiting the vehicle(driver's seat only)
Check that the shift position indicator shows P and that the parking brake indicator is
illuminated before opening the door and exiting the vehicle.
When the power switch is changed to ACC with the shift position held in
N
Performing the following operations allows the power switch to be set to ACC with
the shift position held in N.
1 Operate the shift lever and change the shift position to N when the hybrid
system is operating.
2 Return the shift lever to its regular position (●).
3 Operate the shift lever to N and hold it there until the buzzer sounds.
4 Press the power switch within 5 seconds after the buzzer sounds.
2-2. Driving procedures
213
2
Driving the vehicle
To Next Page
Loading...
