INFORMATION
■ Operation of automatic airflow control
● In order to maintain a comfortable interior, airflow may be directed to seats
without passengers immediately after the hybrid system is started and at other
times depending on the outside temperature.
● After the hybrid system is started, if passengers move around inside or enter/exit
the vehicle, the system cannot accurately detect the presence of passengers and
automatic airflow control will not operate.
■ Operation of manual airflow control
Even if the function is manually switched to directing airflow to only the front seats,
when a rear seat is occupied, it may automatically direct airflow to all seats.
Setting the fan speed in auto mode
When the [AUTO] switch is on, the automatically adjusted fan speed can be
adjusted to suit your preference.
1 Select the air conditioning system options switch.
2 Select the [FAST/ECO].
● [FAST]: Use when the effects of the air conditioning system want to be felt quickly
● [NORMAL]: Normal control
● [ECO]: Use to enhance fuel economy during air conditioning system operation
Warming the interior quickly (Max heat)
When [Max heat] is turned on, in order to warm the interior quickly, the settings of
the air conditioning system will be changed immediately.
1 Select the shortcut screen switch.
2 Select the [Max heat] switch.
● The temperature setting of the air conditioning system will be set to [Hi] and the
[AUTO] switch will be turned on.
● Seat heaters will be set to Hi.
● Heated steering wheel will be set to Hi.
● In the following situations, the front passenger’s side seat heater will be set to
[AUTO].
• When [Climate concierge] is on
• When the system determines that a passenger is in the front passenger seat
4-3. Adjusting the temperature/environment inside the vehicle
293
4
Interior features
To Next Page
Loading...
