■ Distance to empty
● This distance is computed based on your average fuel consumption. As a result, the
actual distance that can be driven may differ from that displayed.
● When only a small amount of fuel is added to the tank, the display may not be updated.
When refueling, turn the power switch off. If the vehicle is refueled without turning the
power switch off, the display may not be updated.
■ Electricity consumption
● When the unit is set to "MPH":
Electricity consumption is the consumption rate of the electricity when EV driving is
performed and equivalent to the fuel consumption for the gasoline vehicles. For this
vehicle, driven distance per kWh of electricity consumed ("miles/kWh") is displayed
as electricity consumption on each screen.
● When the unit is set to "km/h":
Electricity consumption is the consumption rate of the electricity when EV driving is
performed and equivalent to the fuel consumption for the gasoline vehicles. For this
vehicle, electricity consumed per 100 km ("kWh/100 km") is displayed as electricity
consumption on each screen.
G-force
Displays lateral G-forces on the vehicle on the multi-information display.
Displays around the periphery of the G-force display, the left and right steering
amount, accelerator pedal input, and brake fluid pressure.
A
Acceleration G-force on the vehicle
B
Current G-force value (analyzed value of
front/rear and left/right G-forces)
C
Record of the maximum G-forces
The display is reset each time the hybrid system
is started.
D
Accelerator pedal input
E
Brake fluid pressure
F
Left steering amount
G
Right steering amount
If lateral G-forces of 0.5 G or greater are generated, the G-force value display will
turn amber and be held for 2 seconds. (Peak hold function)
5-2. Functions of the displays
361
5
Vehicle status information and indicators
To Next Page
Loading...
