WARNING
● When using steam to clean the vehicle, do not direct steam too close to the sensors, as
doing so may cause a sensor to malfunction.
Turning the Lexus parking assist-sensor function ON/OFF
The Lexus parking assist-sensor can be enabled/disabled on the center display as
follows:
1
Select
.
2 Select [Driving assist].
3 Select [Parking assist-sensor] to change ON (enable)/OFF (disabled).
When ON (enable) is selected, the Lexus parking assist-sensor indicator comes on.
When turned OFF (disabled), the Lexus parking assist-sensor will be disabled and will
not be enabled until the setting is changed to ON again in center display.
(The system will not be reenabled by operating the power switch.)
Detection range of the Lexus parking assist-sensor
■ Detection range of the sensors
▶ Vehicles without Advanced Park
A
Approximately 100 cm (3.3 ft.)
B
Approximately 150 cm (4.9 ft.)
C
Approximately 60 cm ( 2.0 ft.)
6-2. Using the safe driving support functions
444
To Next Page
Loading...
