INFORMATION
■ The parking function can be used even if obstructions exist if
● When using the parking functions at a parking space made of white lines, even
if an obstruction exists in the parking space, the space can be set as the target
parking space. This allows for assistance to continue after setting a parking space
from inside the vehicle and then exiting the vehicle to move an obstruction, such
as a traffic cone placed in a handicapped parking space.
● When perpendicular parking using Advanced Park, 3 parking spaces on each
side of the vehicle (up to 6 total) can be detected. However, when using Remote
control function, only 1 parking space on each side of the vehicle can be detected.
Moving the vehicle forward and backward using Remote control function
After the vehicle is stopped, assistance can be provided to move the vehicle into a
garage, etc., by using the forward and backward movement function.
1 Stop the vehicle at the location you would
like to start assistance.
2 Press the Advanced Park main switch. → P.492
3
Select
and then select [Forward/reverse] .
4 Select [OK] .
5 Exit the vehicle while carrying the electronic key and smartphone, and then
start the Remote Park app on the smartphone.
The detection area of the electronic key is within approximately 3 m (9.8 ft.) around
the vehicle.
6 From outside of the vehicle, confirm the direction of travel on the screen of the
smartphone and then select the start button.
Start operation of Remote control function while standing approximately 1.6 ft. (50
cm) or more from the vehicle and out of the path of the vehicle.The detection area of
the electronic key is within approximately 3 m (9.8 ft.) around the vehicle.
7 Checking the safety of the area around the vehicle, trace the operation area on
the screen of the smartphone continuously, the vehicle will move and parking
assistance will be performed.
6-2. Using the safe driving support functions
512
To Next Page
Loading...
