Adding engine oil
If the oil level is below or near the low level mark, add engine oil of the same type as
that already in the engine.
1 Remove the oil filler cap by turning it counterclockwise.
2 Add engine oil slowly, checking the dipstick.
3 Install the oil filler cap by turning it clockwise.
Checking the coolant
The coolant level is satisfactory if it is between the [FULL] and [LOW] lines on the
reservoir when the hybrid system is cold.
■ Engine coolant reservoir
A
Reservoir cap
B
[FULL] line
C
[LOW] line
If the level is on or below the [LOW] line, add coolant up to the [FULL] line.
■ Power control unit coolant reservoir
A
Reservoir cap
B
[FULL] line
C
[LOW] line
If the level is on or below the [LOW] line, add
coolant up to the [FULL] line.
8-4. Inspection of consumables
611
8
Maintenance and care
To Next Page
Loading...
