WARNING
● Do not bring the AC charging cable to a high-temperature item such as a heating
device.
● Do not apply a load to the AC charging cable and plug-cord (such as wrapping the
AC charging cable around the CCID (Charging Circuit Interrupting Device) and the
charging connector).
● Do not use or leave the AC charging cable in situations where a load is applied to the
outlet and the plug (such as when the CCID (Charging Circuit Interrupting Device) is
hanging in the air without contacting the ground).
NOTICE
■ Precautions when handling AC charging cable
Make sure to observe the following precautions. Failure to observe these precautions
may result in damage to the AC charging cable and AC charging inlet.
● Insert the charging connector straight into the AC charging inlet.
● After inserting the charging connector, do not apply excessive force to or twist the
connector. Also, do not lean on the connector or hang any objects from it.
● Do not step on or trip over the AC charging cable.
● Before removing the charging connector, make sure that it is unlocked.
● After removing the AC charging cable, promptly return it to its proper location.
● After removing the charging connector, securely install the AC charging inlet cap.
■ Precautions for low temperatures
In low temperatures, the AC charging cable and plug-cord may become hard. Therefore,
make sure to not apply excessive force when they are hard. If excessive force is applied to
the hardened AC charging cable and plug-cord, they may be damaged.
1-3. Charging with the plug-in hybrid system
62
To Next Page
Loading...
