■ Temperature detection function
A temperature detection function is equipped to the plug. While charging, if heat is
generated due to looseness on the outlet side etc., this function suppresses heat by
controlling the charging current.
■ Conditions for supplying current to the vehicle
The CCID (Charging Circuit Interrupting Device) is designed to prevent electrical
current from being supplied to the charging connector when it is not connected to
the vehicle, even if the plug is inserted into the outlet.
Operation of CCID (Charging Circuit Interrupting Device) indicators
■ Indicator operation
3 indicators are used to indicate the following conditions.
A
Power indicator
Illuminates when electricity is flowing to the
CCID (Charging Circuit Interrupting Device).
B
Charging indicator
Illuminates when charging is in progress.
C
Error warning indicator
Flashes when there is an electrical leakage or
when a malfunction occurs in the CCID (Charg-
ing Circuit Interrupting Device).
Replacing the plug-cord (Except for Norway, Denmark and Israel)
WARNING
Observe the following precautions when replacing the plug-cord.
● Do not replace the plug-cord with wet hands.
Also, do not replace in a place that is rainy or wet.
● Do not replace the plug-cord when the plug or charging connector are connected.
● Check whether there are any local EV-charging regulations in place, and adhere to
them.
● When replacing the plug-cord, firmly turn the nut of the plug-cord until a click sound
can be heard.
● Do not replace the plug cord in Norway.
1-3. Charging with the plug-in hybrid system
67
1
Before driving
To Next Page
Loading...
