Preparing to use the emergency tire puncture repair kit
Before using the emergency tire puncture repair kit, perform the following.
● Stop the vehicle in a safe place on a hard, flat surface.
● Set the parking brake.
● Change the shift position to P.
● Stop the hybrid system.
● Turn on the emergency flashers.
●
Check the degree of the tire damage.
A tire should only be repaired with the emergency tire puncture repair kit if the damage
is caused by a nail or screw passing through the tire tread.
•
Do not remove the nail or screw from the tire. Removing the object may widen the
opening and disenable emergency repair with the kit.
•
To avoid sealant leakage, move the vehicle until the area of the puncture, if known, is
positioned at the top of the tire.
Storage position of the emergency tire puncture repair kit and tool
A
Emergency tire puncture repair kit
B
Towing eyelet
C
Screwdriver
9-4. If a tire is flat
707
9
When trouble arises
To Next Page
Loading...
