WARNING
● Always wash your hands after handling the 12-volt battery support, terminals, and
other battery-related parts.
● Do not allow children near the 12-volt battery.
■ When replacing the 12-volt battery
After replacing, securely attach the exhaust hose and exhaust hole plug to the exhaust
hole of the new 12-volt battery. If not properly installed, gases (hydrogen) may leak into
the vehicle interior, and there is the possible danger of the gas igniting and exploding.
1 Confirm that the electronic key is being car-
ried.
When connecting the jumper (or booster) cables,
depending on the situation, the alarm may acti-
vate and the doors may lock.
2 Open the hood and exclusive jump starting
terminal cover.
3 Open the exclusive jump starting terminal
cover.
4 Connect a positive jumper cable clamp to
on your vehicle and connect the
clamp on the other end of the positive cable to
on the second vehicle. Then,
connect a negative cable clamp to on the second vehicle and connect the
clamp at the other end of the negative cable to
.
9-5. If a door cannot be opened or locked
727
9
When trouble arises
To Next Page
Loading...
