The error warning indicator on the CCID (Charging Circuit Interrupt-
ing Device) flashes.
Electrical leakage detection function or self-diagnostic function operates and
power is cut off.
When the voltage is insufficient, the error warning indicator may flash when
there is noise interference. Perform a reset and connect to a proper power
source.
If charging does not start, immediately stop charging and contact any author-
ized Lexus retailer or Lexus authorized repairer, or any reliable repairer.
Charging indicator of the charging port does not illuminate, even
though charging connector is connected.
The plug is not properly connected to the socket
Check that the plug is properly connected to the socket.
Charging connector is not securely connected to AC charging inlet
Check the connection status of the charging connector.
● When connecting the charging connector, insert the charging connector
securely.
● After connecting the charging connector, check that the charging indicator
of the charging port is turned on.
If the charging indicator of the charging port does not illuminate, even though
the charging connector is securely connected, there may be a malfunction
in the system. Immediately stop charging and contact any authorized Lexus
retailer or Lexus authorized repairer, or any reliable repairer.
Hybrid battery (traction battery) is already fully charged
When the hybrid battery (traction battery) is fully charged, charging is not
performed.
The charger does not operate
Please contact the facility manager when there is a problem with charger.
When the charging indicator on the charging port is blinking
When charging indicator of the charging port flashes: Charging schedule is
registered
9-8. If the plug-in hybrid system cannot be used normally
740
To Next Page
Loading...
