● Turn [Charge now] ON
● While the charging indicator is flashing, remove and reconnect the charging
connector within 5 seconds
■ While charging
When the power switch is turned to ON and the energy monitor is displayed on the
audio system screen, the charging connector is displayed on the energy monitor and
the flow of electricity during charging is displayed.
Handling the charging cable after charging has completed
To prevent electrical shock, be sure to remove by the following procedures.
1 Unlock the doors to unlock the charging connector.
The charging connector will be unlocked and the AC charging inlet light will illuminate
when the doors are unlocked.
If the charging connector is unlocked during charging (while the charging indicator is
illuminated), charging will be interrupted.
2 Make sure to hold the body of the charging connector and pull it towards you.
INFORMATION
■ When removing the charging connector
Unlock the doors using the smart entry & start system or wireless remote control
to unlock the charging connector, check that the lock is released, and then pull the
charging connector towards you.
3 Attach the charging connector cap.
1-3. Charging with the plug-in hybrid system
89
1
Before driving
To Next Page
Loading...
