The charging start time is determined based on the charging schedule at the time that
the AC charging cable was connected.
● After connecting the AC charging cable, check that the charging indicator of the
charging port flashes
● Do not use an socket that has a power cut off function (including a timer function)
Use an socket that constantly supplies electricity. For sockets where the power is cut
off due to a timer function, etc., charging may not be carried out according to plan if
the power is cut off during the set time.
■ When the AC charging cable remains connected to the vehicle
Even if multiple consecutive charging schedules are registered, the next charge will
not be carried out according to the charging schedule until the AC charging cable
is removed and reconnected after charging completes. Also, when the hybrid battery
(traction battery) is fully charged, charging according to the charging schedule will not be
carried out.
■ Smartphone link
It may be necessary to use a smartphone with a dedicated app to change the next
charging schedule.
■ When charging schedule setting operations are canceled
When the vehicle is in the following conditions, charging schedule setting operations are
canceled.
● The power switch is turned off before the settings are confirmed
● The vehicle starts off
● A display with a higher priority than that of the charging schedule setting is shown
■ When charging schedules are ignored
When the following operations are performed while the charging schedule is on standby,
charging schedule is temporarily canceled and charging is started.
● When turning My Room Mode on
● When turning [Charge now] on
● When an operation that temporarily cancel charging using the charging schedule
■ Effects of outside temperature
When the charging mode is set to[Departure time], charging schedule may be ignored
due to the outside temperature and charging may start.
1-3. Charging with the plug-in hybrid system
94
To Next Page
Loading...
