ATEX
20 GA02411_002_C0 - 10/2016 - © Leybold
Chemical Reactions
The pump shall not come in to contact and shall not be used in connection
with reactive or corrosive gases which may cause an exothermal chemical
reaction.
Additional Safety Measures
Overheating of the pump can give rise to temperatures which exceed the
certified maximum surface temperature.
Compliance with the operating parameters stated in these Operating
Instructions must be ensured.
Run checks on a regular basis and comply with the maintenance schedule.
Additional Maintenance Requirements
In those cases where dust may deposit itself on the pump or the motor sur-
faces, measures must be introduced which ensure that such deposits are
removed on a regular basis.
In order to ensure that the defined level of safety is maintained, only accesso-
ry parts and wearing parts from Leybold must be used.
To Next Page
Loading...
