Safety Information
5GA02411_002_C0 - 10/2016 - © Leybold
0 Important Safety Information
Explanation of Warning Symbols
Hazardous voltage
Disconnect power before opening.
Contact causes electrical shock.
Hot surface
Do not touch.
Allow this area to cool before servicing
Burn hazard
Hot surface inside. Do not touch.
Wear protective equipment.
Reactive or corrosive media
Reactive or corrosive gases may cause health problems .
When the pump has been used to pump reactive or corrosive gases
before, introduce corresponding safety precautions before opening it,
e.g. wear gloves, breathing protection or protection clothing
Toxic gases
must not be pumped with this pump.
Danger of explosion
Explosive gases and vapours
must not be pumped with this pump.
Fire danger
Combustible gases and vapours,
gas mixtures with an oxygen share exceeding 21% and
pyrophorous (self-igniting) substances
must not be pumped with this pump.
To Next Page
Loading...
