Maintenance
28 GA01601_002_C1 - 03/2018 - © Leybold
5.2 Leybold Service
Whenever you send a pump to Leybold, indicate whether the pump is conta-
minated or is free of substances which could pose a health hazard. If it is
contaminated, specify exactly which substances are involved. You must use
the form we have prepared for this purpose; we will forward the form on
request.
A copy of the form is printed at the end of these operating instructions:
„Declaration of contamination of vacuum equipment and components“.
Another suitable form is available from the Leybold homepage:
www.leybold.com → Leybold → Docu men tation → Download Documents.
Please attach this form to the pump or enclose it with the pump.
This statement detailing the contamination is required to satisfy legal
requirements and for the protection of our employees.
Pumps which are not accompanied by a contamination statement will be
returned to the sender.
Use secure shipping packaging
Package the pump such that it will not suffer any damage when being
shipped and so that no oil or hazardous materials can escape from the
packaging.
CAUTION
To Next Page
Loading...
Need help?
General
