Wearing Parts and Original Spare Parts
37GA01601_002_C1 - 03/2018 - © Leybold
7 Wearing Parts and Original Spare Parts
As to spare parts for your vacuum pump, please refer to the spare parts list
enclosed with the product.
7.1 Maintenance Kits and Repair Sets
The maintenance and repair kits have been so arranged that the spare and
exchange parts they contain cover any servicing work which might be
required.
Each set comes with brief instructions in which the necessary work is
detailed. This very much simplifies the servicing or repair work.
Given in the following is a brief description of the individual kits and how to
use these.
Maintenance Kit 1
This kit is recommended for maintenance after an operating period of one
year. It contains the gaskets for the oil box, the internal demister which
separates the oil from the gas (for contents see Fig. 9).
Repair Set 1
This set is used for the seal on the side of the motor. It contains the gaskets
for the side of the motor, the shaft sealing ring as well as the following
wearing parts: coupling sleeves and compression spring for the oil pump
(for contents see Fig. 10).
Maintenance Kit 2
This kit will only be required in those cases where the pump is not capable of
attaining its ultimate pressure. This kit contains the valves, the internal
demister which separates the oil from the gas as well as the gaskets for the
oil box (for contents see Fig. 11).
Complete Set
This set contains all wearing parts, all gaskets and the internal demister
which separates the oil from the gas.
They are used as follows:
1. Maintenance after three years of operation
2. Complete repair
(for contents see Fig. 10, 11 and 12).
To Next Page
Loading...
Need help?
General
