Data Metrics Explained
46
Ascent: The total measurement of elevation gained that current
ride
Auto Scroll: Page scroll changes to show different information.
Example: Avg Speed, Elevation, Temperature
Auto Start/Stop: This will automatically pause the timer when
you stop, and start when you begin to move. This is used to not
record time during stops or rest periods
Avg Speed: The average speed of the current ride
*Cadence - Avg Cad: The average revolutions of the crank arm
per minute
*Cadence: The revolution of the crank arms per minute
Calories Alert: A pop up notification when you hit a set calorie
goal
Calories: The amount of calories burned that current ride.
This information is calculated based on your personal settings
Clock: The current time of day
Descent: The total measurement of elevation lost that current
ride
Distance: The distance of the current ride
Elevation: The current measurement of height above sea level
based on your location
*Heart Rate - Avg HR: The average heart rate during that current
ride
*Heart Rate - Max HR: The max heart rate during that current
ride
*Heart Rate: Your heart rate in beats per minute (bpm)
Lap Preset: An automatic notification to mark a lap based on a
preset you set for distance or time.
Odometer: Accumulative recording of distance between rides
*Power - 10s Power: A 10 second average output of watts
*Power - 3s Power: A 3 second average output of watts
*Power - L/R % Smoothness: The measure of how evenly power
is being applied to the left and right through the pedal stroke
*Power - L/R % Tq Efficiency: The measure of efficiency in
pedaling from left to right
*Power Balance: The balance of power between left/right
*Power: The output of watts
Ride Distance Alert: A pop up notification when you hit a set
distance goal
Ride Time Alert: A pop up notification when you hit a set time
goal
Speed - Avg Speed: The average speed during that ride
Speed - Max Speed: The maximum speed during that ride
Speed: The current rate of speed
Temperature: The current measurement of hot and cold
Timer: Is a stop watch of the current ride
Trip 1: The distance of a trip. Accumulative recording of distance
between rides
Trip 2: The distance of a trip. Accumulative recording of distance
between rides
*Separate ANT+™ or Bluetooth® device required to see these metrics
To Next Page
Loading...
