LG 32LB5R Series - Page 123

APPENDIX
121
1199.. BBlluuee AAddjjuussttmmeenntt ((CCoommmmaanndd 22 :: $$))
G To adjust blue in colour temperature.
Transmission
Data Min : 0 ~ Max : 50
*
Refer to ‘Real data mapping 2’. See page 121.
[k][$][ ][Set ID][ ][Data][Cr]
Ack
[$][ ][Set ID][ ][OK][Data][x]
2200 .. TTuunnee CCoommmmaanndd//CChhaannnneell TTuunniinngg
((CCoommmmaanndd11::mm,, CCoommmmaanndd22::aa))
G To select a programme for the main picture.
Transmission
Data 0: Min: 0 ~ Max: 63 (0~C7, 200 Pr is on)
Refer to ‘Real data mapping 1’.
1:
Do not care
2: 0 : Main
1 : Sub
[m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr]
Ack
[$][ ][Set ID][ ][OK][Data][x]
2211.. AAbbnnoorrmmaall SSttaattee ((CCoommmmaanndd 22 :: zz))
G To recognize an abnormal state.
This feature is not available for all models.
Transmission
Data FF : Read
* This function is “read only”.
[k][z][ ][Set ID][ ][FF][ ][Cr]
Ack
[z][ ][Set ID][ ][OK][Data][x]
Data 0: Normal (Power on and signal exist)
1: No signal (Power on)
2: Turn the TV off by remote control
3: Turn the TV off by sleep time function
4: Turn the TV off by RS-232C function
5: 5V down
6: AC down
7: Turn the TV off by Fan Alarm function
8: Turn the TV off by Off time function
9: Turn the TV off by Auto sleep function
a: Turn the TV off by AV board detect
Ack
[p][ ][Set ID][ ][OK/NG][Data][x]
2222.. IISSMM MMeetthhoodd
((CCoommmmaanndd 11 :: jj,, CCoommmmaanndd 22 :: pp))
G To control the ISM method. You can also adjust ISM
Method in OPTION menu.
It is not possible to sue this function with LCD TV models.
Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data 0: Normal
1: White wash
2: Orbiter
3: Inversion
2233.. LLooww PPoowweerr
((CCoommmmaanndd 11 :: jj,, CCoommmmaanndd 22 :: qq))
G To reduce the power consumption of the TV. You can also
adjust Low Power in OPTION menu.
It is not possible to sue this function with LCD TV models..
Transmission
Data 0 : Off
1 : On
[j][q][ ][Set ID][ ][Data][ ][Cr]
Ack
[q][ ][Set ID][ ][OK/NG][Data][x]
2244.. AAuuttoo CCoonnffiigguurree
((CCoommmmaanndd 11 :: jj,, CCoommmmaanndd 22 :: uu))
G To adjust picture position and minimize image shaking
automatically. It works only in RGB (PC) mode.
Transmission
Data 1: To set
[j][u][ ][Set ID][ ][Data][Cr]
Ack
[u][ ][Set ID][ ][OK/NG][Data][x]
**
RReeaall ddaattaa mmaappppiinngg 11
0 : Step 0
A : Step 10 (Set ID 10)
F : Step 15 (Set ID 15)
10 : Step 16 (Set ID 16)
64: Step 100
6E : Step 110
73: Step 115
74 : Step 116
C7: Step 199
FE : Step 254
FF : Step 255
**
RReeaall ddaattaa mmaappppiinngg 22
0:-40
1:-39
2:-38
28 : 0
4E : +38
4F : +39
50 : +40
All manuals and user guides at all-guides.com