28
206-4281
Ez Download Utility (Cont.)
(Continued from previous page)
8. The elds at the right of the screen will change depending on the currently highlighted le.
Select the appropriate option(s) for each le, as applicable.
• For software and splash screen image les: The elds at the right of the screen show the TV
software versions and any available Forced Update options. Do not select any Forced Update
options unless you have been specically instructed to do so or have previous experience with
Expert Software Updates.
• For Clone/Conguration (.tlx) les: If an FTG Channel Map is included in the selected Clone/
Conguration (.tlx) le, a Channel Tuning / Channel Banner Display eld at the right of the
screen enables you to choose the format for the channel tuning/banner display. Press the
green button on the Installer Remote to select Logical tuning, or press the yellow
button on the Installer Remote to select Physical tuning. A checkmark will appear at the left
of the selected option. Logical tuning is selected by default.
Note: If the selected “.tlx” le does not include an FTG Channel Map, the message, “No
Channel Map in TLX le,” will be displayed at the right of the screen.
9. When you are ready to continue, use the arrow keys on the Installer Remote to select Apply,
and then press OK.
Update progress will be shown in a new window. Do NOT remove the USB device while
updates are in progress. When the Ez Download process is complete, an overview of the
results will briey be displayed and then, the TV will reboot.
10. Remove the USB memory device, and verify that the appropriate configuration/update(s) is/are
resident on the TV.
Note: If you updated the TV conguration with a Clone/Conguration le, upon restart, the TV
tunes according to the Start Channel setting in the Installer Menu. If a Start Channel is specied,
the TV will tune to that channel, though in the case of FTG Mode via CPU conguration, a channel
banner will only be displayed if the Start Channel is included in the FTG Channel Map (depending
on your selection in step 8, the channel banner will display either the Start Channel’s logical
channel number or physical RF channel number). Otherwise, the TV will either return to the last
channel tuned (TV in Pass-through Mode) or tune to the rst channel in the FTG Channel Map
(TV in FTG Mode via CPU). In the latter case, remember that the channels in the FTG Channel
Map are always arranged in logical order, regardless of your selection in step 8.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
