22
Connect the AV cable as shown below and connect the power cord.
(See page 14)
RCA-PC
Audio Cable
(not included)
VCR/DVD/Set-top Box
HDMI-DVI
Signal Cable
(not included)
VCR/DVD/Set-top Box
Select an input signal.
Press INPUT on the remote control to select the input signal.
Or, press INPUT on the bottom of the set.
HDMI Signal Cable
(not included)
Connecting to External Devices
Connecting with an HDMI-DVI Signal Input Cable or an HDMI Signal Input Cable.
• Select HDMI/DVI.
HDMI supports high definition input and HDCP (High-bandwidth Digital Content
Protection). Some devices require HDCP in order to display HD signals.
Note: Dolby Digital is not supported.
HDMI Input (480p/576p/720p/1080i/1080p)
INPUT → < > → OK
INPUT → ◄ ► → AUTO/SET
1
2
Input List
AV Component RGB HDMI/DVI SuperSign
Set
Set
To Next Page
Loading...
